########################### CRUCIAL NOTES #####################
# 1) It is imperative that you use the exact same spacing between the lines, as given in
# this example. Otherwise, the script will NOT work properly.
# The first time we tried running it, we opened it with an editor on one machine & pasted
# it into another editor. However, the spaces were NOT preserved & we did NOT noticed
#
#2) To RUN the Script: Just enter the script name at the command line:
# Ex: 4mguest@flm-4m-1a{11} 2005dec10.manydarks.csh
##################################################################
#
#!/bin/csh
##
## Script to take 10 darks per integration time
## itimes of 10s, 20s, 30s and 300s
##
#Configure for 10s Darks
config.exposure.pl << __CFG-END__
y
dark
dark10s
dark10s
10
y
n
__CFG-END__
more.singleimages.pl 10 <<__SING-END__
y
__SING-END__
#Configure for 20s Darks
config.exposure.pl << __CFG-END__
y
dark
dark20s
dark20s
20
y
n
__CFG-END__
more.singleimages.pl 10 <<__SING-END__
y
__SING-END__
#Configure for 30s Darks
config.exposure.pl << __CFG-END__
y
dark
dark30s
dark30s
30
y
n
__CFG-END__
#
more.singleimages.pl 10 <<__SING-END__
y
__SING-END__
#
# switch to spectroscopic darks #####################
#
set.bias.pl << __BIA-END__
s
__BIA-END__
#
#Configure for spectro 300s/8 NReads Darks
config.exposure.pl << __CFG-END__
y
dark
dark300s_8nrd
dark300s_8nrd
300
8
y
n
__CFG-END__
more.singleimages.pl 10 <<__SING-END__
y
__SING-END__
#Configure for spectro 30s/8 NReads Darks
config.exposure.pl << __CFG-END__
y
dark
dark30s_8nrd
dark30s_8nrd
30
8
y
n
__CFG-END__
more.singleimages.pl 10 <<__SING-END__
y
__SING-END__
#Configure for spectro 10s/1 NReads Darks
config.exposure.pl << __CFG-END__
y
dark
dark10s_1nrd
dark10s_1nrd
10
1
y
n
__CFG-END__
more.singleimages.pl 10 <<__SING-END__
y
__SING-END__
#Configure for spectro 30s/1 NReads Darks
config.exposure.pl << __CFG-END__
y
dark
dark30s_1nrd
dark30s_1nrd
30
1
y
n
__CFG-END__
more.singleimages.pl 10 <<__SING-END__
y
__SING-END__